SC-2020 WINNER Woven Fusible Interlining (Buckram) – 190 GSM Hard Touch

SC-2020 WINNER woven fusible interlining is a 190 GSM, 100% cotton garment buckram with an updated 22 x 22 / 60 x 60 woven construction, HDPE fusible coating and Hard Touch finish. It is developed for collars, cuffs, plackets and other structured garment components that need crisp definition with slightly less weight than the 200-202 GSM hard-touch grades.

Manufactured by Sadiq Interlinings in Gujranwala, Pakistan, SC-2020 WINNER is supplied in a standard 60-inch width. Black and White options support light and dark garment programmes, subject to production availability. Custom width requirements can be assessed against technical feasibility and order volume.

SC-2020 WINNER Buckram: Local and International Buying Terms

In Pakistan’s garment, tailoring and uniform trade, woven fusible interlining is commonly requested as buckram or bukram. Buyers may also use collar buckram, shirt buckram, fusing buckram, fusible buckram, Ban/Patti buckram or collar Patti interlining. SC-2020 WINNER belongs to this garment-grade woven fusible buckram family.

International sourcing teams may search for 190 GSM woven fusible interlining, hard-touch cotton interlining, HDPE-coated collar interlining, woven interfacing for shirts or 22 x 22 / 60 x 60 cotton interlining. These descriptions refer to its weight, woven base, adhesive system, hand feel and intended garment function.

SC-2020 WINNER is not a non-woven interfacing and should not be confused with non-fusible craft or bookbinding buckram. For production selection, confirm the article code, GSM, construction, finish, coating, width, colour and target component rather than relying on the word “buckram” alone.

Explore the complete woven fusible interlining and buckram range or review the woven interlining catalogue for adjacent grades.

SC-2020 WINNER Technical Specifications

Download SC-2020 WINNER Technical Data Sheet (PDF)

What the 22 x 22 / 60 x 60 Hard-Touch Construction Delivers

The updated 22 x 22 yarn construction with balanced 60 x 60 thread density gives SC-2020 WINNER a uniform, stable cotton base for controlled cutting, folding and sewing. The 190 GSM weight provides firm support while keeping the article below the 195-202 GSM adjacent grades.

The Hard Touch finish is intended for a crisp garment profile, while the HDPE coating activates under controlled heat, pressure and dwell time. The target glue-line temperature is measured at the adhesive interface, not simply from the machine display; this distinction matters when validating different shell fabrics, presses and line speeds.

Recommended Applications for SC-2020 WINNER

Formal and Structured Casual Shirt Collars

SC-2020 WINNER is suitable for collar points, collar stands and fold lines where a clean hard-touch profile is required. Its 190 GSM weight gives defined structure without moving to the heavier 200-202 GSM grades.

Cuffs and Front Plackets

The compact woven base supports accurate cutting and stitching in cuffs, button plackets and pocket plackets. Production teams should confirm seam allowance bulk, folding behaviour and buttonhole quality on the intended shell fabric.

Shalwar Kameez and Kurta Ban/Patti

The Hard Touch construction can add shape to kurta Ban, Patti, neck bands and structured openings in shalwar kameez. It is relevant where the component needs to maintain a crisp outline through wearing, pressing and the approved care cycle.

Corporate, School and Institutional Uniform Shirts

For repeat uniform programmes, SC-2020 WINNER can be evaluated where collars, cuffs and plackets require consistent structure across production lots. Approve bond durability and appearance against the programme’s actual wash and pressing method.

Custom Structured Garment Components

Other woven garment components can be assessed according to required stiffness, shell-fabric weight, component geometry and care method. Send a representative face-fabric cutting and application details for a meaningful production trial.

SC-2020 WINNER Fusing Guide

1. Condition materials: keep the face fabric and interlining in the production environment before testing.
2. Confirm the coated side: place the HDPE-coated face against the wrong side of the shell fabric.
3. Measure the glue line: machine temperature and actual adhesive-interface temperature are not always identical.
4. Cool before judging: do not peel, bend or stack the fused panel while the adhesive is still hot.
5. Test the intended care cycle: verify appearance, bond and dimensional behaviour under the actual wash, dry and pressing conditions.
6. Record the approved recipe: document machine, temperature, glue-line result, pressure, dwell time and line speed for repeatable production.

Why Manufacturers Select SC-2020 WINNER

Balanced 60 x 60 Woven Cotton Base

The balanced 60 x 60 thread density supports a uniform, stable surface for controlled cutting, folding and sewing. Consistent grain alignment helps maintain repeatable behaviour across production.

Crisp 190 GSM Hard-Touch Profile

SC-2020 WINNER is positioned for buyers who need hard-touch structure at a slightly lower nominal weight than the 195-202 GSM grades. It is particularly relevant to shirt collars, Ban/Patti, cuffs and plackets requiring a defined outline.

Defined HDPE Fusing Window

Separating machine temperature from target glue-line temperature gives production teams a more useful validation method. Pressure and dwell time are stated alongside temperature so the bond is developed as a controlled process rather than by heat alone.

B2B Sampling and Technical Selection Support

Garment factories, shirt manufacturers, uniform producers, wholesalers, brands and export sourcing teams can request a trial sample. Sharing the shell-fabric composition, GSM, finish, component, care method and press details helps the technical team evaluate the right starting grade.

SC-2020 WINNER vs SC-2018 ROSE, SC-2017 and SC-2016

These woven fusible grades share cotton bases and HDPE coating, but differ in weight, construction and finish. Use the comparison to create a shortlist, then approve the final grade through a fused sample on the actual shell fabric.

Choose SC-2020 WINNER when the requirement is a balanced 22 x 22 / 60 x 60 construction, 190 GSM weight and Hard Touch. Consider SC-2018 ROSE for heavier 202 GSM close-weave structure, SC-2017 for 195 GSM firm structure, or SC-2016 when a medium-hard hand is preferred.

190 GSM Woven Buckram Manufacturer in Pakistan

Sadiq Interlinings manufactures SC-2020 WINNER in Gujranwala, Punjab, for B2B garment factories, shirt manufacturers, uniform producers, tailoring-material wholesalers, apparel brands and export sourcing teams. Local buyers searching for 190 GSM buckram in Pakistan, collar buckram manufacturer, shirt fusing or hard-touch interlining can request a production sample before confirming bulk supply.

Domestic enquiries can be supported for garment centres including Gujranwala, Lahore, Faisalabad, Karachi and Sialkot. International buyers can specify destination, width, colour, quantity, packing and shipping requirements for an export quotation. Current production availability, MOQ, lead time and documentation are confirmed against the enquiry.

Ordering, Sampling and Supply

When requesting an SC-2020 WINNER sample or quotation, provide the face-fabric composition and GSM, garment component, required hand feel, colour, width, estimated quantity, destination, care method and available fusing equipment. This helps the technical and sales teams prepare the correct trial.

Standard width is 60 inches. Custom requirements are subject to technical feasibility, minimum quantity and order confirmation. Roll length, packing, lead time, payment terms, export documentation and current Black/White availability are confirmed per quotation.

Frequently Asked Questions