DC-2030 (46MTRS) Woven Fusible Interlining (Buckram) – 205 GSM Medium Hard Touch

DC-2030 (46MTRS) woven fusible interlining is a 205 GSM, 100% cotton garment buckram with a 24 x 24 / 60 x 60 woven construction, HDPE fusible coating and Medium Hard Touch finish. It is designed for structured garment components that need pronounced support, crisp folding and a controlled Medium Hard Touch without moving to the most rigid hard-touch profile.

Manufactured by Sadiq Interlinings in Gujranwala, Pakistan, DC-2030 (46MTRS) is supplied in standard 60-inch width. White, Black and Off White options support light and dark garment programmes, subject to production availability. Custom requirements can be assessed against technical feasibility and order volume.

DC-2030 (46MTRS) Buckram: Local and International Buying Terms

In Pakistan’s garment, tailoring and uniform trade, woven fusible interlining is commonly requested as buckram or bukram. Buyers may also use collar buckram, shirt buckram, fusing buckram, fusible buckram, Ban/Patti buckram or collar Patti interlining. DC-2030 (46MTRS) belongs to this garment-grade woven fusible buckram family.

International sourcing teams may search for 205 GSM woven fusible interlining, medium-hard cotton interlining, 46 metre roll buckram, HDPE-coated collar interlining, woven interfacing for shirts or 24 x 24 / 60 x 60 cotton interlining. These descriptions refer to its weight, woven base, adhesive system, hand feel and intended garment function.

DC-2030 (46MTRS) is not a non-woven interfacing and should not be confused with non-fusible craft or bookbinding buckram. For production selection, confirm the article code, GSM, construction, finish, coating, width, colour and target component rather than relying on the word “buckram” alone.

Explore the complete woven fusible interlining and buckram range or review the woven interlining catalogue for adjacent grades.

DC-2030 (46MTRS) Technical Specifications

Download DC-2030 (46MTRS) Technical Data Sheet (PDF)

What the 24 x 24 / 60 x 60 Medium-Hard Construction Delivers

The updated 24 x 24 yarn construction with balanced 60 x 60 thread density gives DC-2030 (46MTRS) a uniform cotton base for controlled cutting, folding and sewing. At 205 GSM, the article delivers substantial reinforcement while the 24 x 24 yarn construction and balanced 60 x 60 thread density support accurate cutting, folding and sewing.

The Medium Hard Touch finish provides crisp, controlled structure without the most rigid hard-touch result, while the HDPE coating develops a controlled bond under heat, pressure and dwell time. The target glue-line temperature is measured at the adhesive interface, not simply from the machine display; this distinction matters when validating different shell fabrics, presses and line speeds.

Recommended Applications for DC-2030 (46MTRS)

Formal and Casual Shirt Collars

DC-2030 (46MTRS) is suited to collar points, collar stands and fold lines where clean shape is needed without a rigid board-like feel. Its 205 GSM weight and Medium Hard Touch suit formal, uniform and structured casual shirt programmes that require reliable collar shape and fold control.

Cuffs and Front Plackets

The compact woven base supports accurate cutting and stitching in cuffs, button plackets and pocket plackets. Production teams should confirm seam allowance bulk, folding behaviour and buttonhole quality on the intended shell fabric.

Shalwar Kameez and Kurta Ban/Patti

The Medium Hard Touch construction can add firm, neat shape to kurta Ban, Patti, neck bands and front openings in shalwar kameez while retaining workable sewing performance. Validate the finished component through the intended pressing and care cycle.

Structured Uniform and Work Shirts

For repeat uniform programmes, DC-2030 (46MTRS) can be evaluated where collars, cuffs and plackets need consistent medium-hard support across production lots. Approve bond durability and appearance against the programme’s actual wash and pressing method.

Custom Woven Garment Components

Other woven garment components can be assessed according to required softness, shell-fabric weight, component geometry and care method. Send a representative face-fabric cutting and application details for a meaningful production trial.

DC-2030 (46MTRS) Fusing Guide

1. Condition materials: keep the face fabric and interlining in the production environment before testing.
2. Confirm the coated side: place the HDPE-coated face against the wrong side of the shell fabric.
3. Measure the glue line: machine temperature and actual adhesive-interface temperature are not always identical.
4. Cool before judging: do not peel, bend or stack the fused panel while the adhesive is still hot.
5. Test the intended care cycle: verify appearance, bond and dimensional behaviour under the actual wash, dry and pressing conditions.
6. Record the approved recipe: document machine, temperature, glue-line result, pressure, dwell time and line speed for repeatable production.

Why Manufacturers Select DC-2030 (46MTRS)

Balanced 60 x 60 Woven Cotton Base

The balanced 60 x 60 thread density supports a uniform, stable surface for controlled cutting, folding and sewing. Consistent grain alignment helps maintain repeatable behaviour across production.

Structured 205 GSM Medium-Hard Profile

DC-2030 (46MTRS) is positioned for buyers who need pronounced, repeatable reinforcement with a Medium Hard Touch and a practical 46-metre roll format. It is particularly relevant to shirt collars, Ban/Patti, cuffs and plackets where comfort and shape must be balanced.

Defined HDPE Fusing Window

Separating machine temperature from target glue-line temperature gives production teams a more useful validation method. Pressure and dwell time are stated alongside temperature so the bond is developed as a controlled process rather than by heat alone.

B2B Sampling and Technical Selection Support

Garment factories, shirt manufacturers, uniform producers, wholesalers, brands and export sourcing teams can request a trial sample. Sharing the shell-fabric composition, GSM, finish, component, care method and press details helps the technical team evaluate the right starting grade.

DC-2030 (46MTRS) Compared with Adjacent Medium-Hard Grades

These articles sit in a similar weight and firmness range but use different constructions, widths or roll formats. The table is a selection guide; final approval must come from a fused sample on the actual shell fabric.

Choose DC-2030 (46MTRS) when the requirement is a 205 GSM Medium Hard Touch cotton interlining with 24 x 24 / 60 x 60 construction, 60-inch width and 46-metre roll designation. Consider SC-2016, SC-ROSE PLUS or SC-6202 LENO when their construction or width options better match the programme.

205 GSM Woven Buckram Manufacturer in Pakistan

Sadiq Interlinings manufactures DC-2030 (46MTRS) in Gujranwala, Punjab, for B2B garment factories, shirt manufacturers, uniform producers, tailoring-material wholesalers, apparel brands and export sourcing teams. Local buyers searching for 205 GSM buckram in Pakistan, collar buckram manufacturer, shirt fusing or medium-hard interlining can request a production sample before confirming bulk supply.

Domestic enquiries can be supported for garment centres including Gujranwala, Lahore, Faisalabad, Karachi and Sialkot. International buyers can specify destination, width, colour, quantity, packing and shipping requirements for an export quotation. Current production availability, MOQ, lead time and documentation are confirmed against the enquiry.

Ordering, Sampling and Supply

When requesting a DC-2030 (46MTRS) sample or quotation, provide the face-fabric composition and GSM, garment component, required hand feel, colour, width, estimated quantity, destination, care method and available fusing equipment. This helps the technical and sales teams prepare the correct trial.

Standard width is 60 inches and the article designation identifies a nominal 46-metre roll. Final roll-length tolerance, packing, custom requirements, minimum quantity, lead time, payment terms, export documentation and current White/Black/Off White availability are confirmed per quotation.

Frequently Asked Questions